Airmar

92 products

$35.00

10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be...

Sold Out

Airmar 11-Pin Low-Frequency Mix Match Cable f/Raymarine [MMC-11R-LDB]

$135.00

11-Pin Low-Frequency Mix & Match Cable for RaymarineSome CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, pl...

Airmar 117WR-1 Crows Foot Transducer Wrench [117WR-1]

$32.10

117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. ...

Sold Out

Airmar 117WR-2 Transducer Hull Nut Wrench [117WR-2]

$45.00

117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.Fo...

Airmar 117WR-3 Double Handle Transducer Wrench [117WR-3]

$53.73

117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nu...

Airmar 117WR-4 Transducer Housing Wrench [117WR-4]

$35.00

117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bro...

Airmar 164WR-1 Crows Foot Transducer Wrench [164WR-1]

$50.00

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. ...

Airmar 164WR-2 Transducer Hull Nut Wrench [164WR-2]

$68.00

164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use wi...

Airmar 164WR-3 Double Handle Transducer Wrench [164WR-3]

$84.00

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nu...

Sold Out

Airmar 175WR-4 Transducer Housing Wrench [175WR-4]

$39.00

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench...

Airmar 599 Low/High Frequency - In-Hull Chirp Transducer w/o Connector [R599C-LH]

$5,737.50

Low/High Frequency - In-Hull Chirp Transducer without ConnectorRely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain,...

Airmar 60WR-1 Crows Foot Transducer Wrench [60WR-1]

$35.00

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. ...

Airmar 60WR-2 Transducer Hull Nut Wrench [60WR-2]

$45.00

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For...

Airmar 60WR-3 Double Handle Transducer Wrench [60WR-3]

$56.00

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut...

Airmar 60WR-4 Transducer Housing Wrench [60WR-4]

$36.00

60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 6...

Airmar 75WR-1 Crows Foot Transducer Wrench [75WR-1]

$36.00

75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. ...

Airmar 75WR-2 Transducer Hull Nut Wrench [75WR-2]

$46.00

75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For us...

Airmar 75WR-3 Double Handle Transducer Wrench [75WR-3]

$56.00

75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut...

Sold Out

Airmar 75WR-4 Transducer Housing Wrench [75WR-4]

$37.00

75WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench...

Sold Out

Airmar B117 Bronze 0 Depth Temp w/Ray Connector f/CP370 DSM300 [B117-DT-RAY]

$289.99

B117 Bronze 0° Depth & Temp with Ray Connector for CP370 & DSM300The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design ...

Sold Out

Airmar B117 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin [B117-DT-HB]

$289.99

B117 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-PinThe B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes dr...

Sold Out

Airmar B164 Bronze Thru-Hull Transducer w/Humminbird - 14-Pin Plug - 12 [B164-12-14HB]

$1,275.00

B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 12°Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mo...

Sold Out

Airmar B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 0 [B164-0-HB]

$1,275.00

B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 0°Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush...

Sold Out

Airmar B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12 [B164-12-HB]

$1,275.00

B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12°Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Elementâ„¢ technology to a higher power. The 1kW, fl...